Using Your Floor Sanitizer
Fig 1a
Operating Instructions:
Fig 1b
Fig 2
Fig 3
Fig 4
HELPFUL HAAN HINT:
Never leave the appliance in one spot on any surface for any period of time. Always place your Floor Sanitizer on the Floor Protector/ Resting Mat when stationary and make sure the floor sanitizer is turned off not in use.
1)Remove all parts from the packaging.
2)Assemble the unit as described on page 6.
3)Place the Floor Sanitizer on the Floor Protector/ Resting Mat and remove the water tank by pressing the water tank removal button. (Fig 1a)
4)Grasp the water tank, pull out and up to remove. (Fig 1b)
5)Turn the cap on the water tank
6)After filling the water tank with water, firmly turn the cap clockwise to close. Insert the tank, cap down, into the receptacle in the main unit and push forward until it clicks into place. (Fig 3)
7)Press the STEAM on/off button found on the front of the unit. It takes approximately 30 seconds for the floor sanitizer to heat up.
8)Place an
9)Raise the unit off the Floor Protector/Resting Mat and lightly press it down onto the
10)Push and pull the floor sanitizer slowly across the floor to thoroughly steam clean each section.
11)When there is no more water in the water tank, you will hear a vibration sound from the main unit. To refill the water tank and continue to sanitize, turn your floor sanitizer off. Unplug the unit from the electrical wall outlet and remove the water tank and refill the water tank as before.
12)When you have finished using the Floor Sanitizer, turn it ‘OFF’, place it on the Floor Protector/ Resting Mat and wait until the Floor Sanitizer cools down for approximately five (5) minutes
pg 8 | 877 - HAAN DIRECT / 877 - 422 - 6347 | www. haanusa . com |
