Haan SI-35 user manual Before Using Your Floor Sanitizer

Before Using Your Floor Sanitizer

i

Be sure to read ALL instructions and warnings before using your HAAN Floor Sanitizer.

HELPFUL HAAN HINT: Never leave the appliance in one spot on any surface for any period of time. Always place your Floor Sanitizer on the Floor Protector/Resting Mat when stationary and make sure the floor sanitizer is turned off not in use.

!Warning

Your floor sanitizer is designed to clean hard floor surfaces that will withstand high heat. Do not use on unsealed wood or unglazed ceramic floors. On surfaces that have been treated with wax or some no-wax floors, the sheen may be removed by the heat and steam action. It is always recommended to test an isolated area of the surface to be cleaned before proceeding. We also recommend that you check the use and care instructions from the floor manufacturer.

CAUTION

HELPFUL HAAN HINT: DO NOT add cleaning solutions, scented perfumes, oils or any other chemicals to the water used in this appliance. Use regular tap water, or if the tap water in your area is very hard, we recommend you use distilled/purified water. Always empty water from water tank after use.

Use a grounded receptacle. Use only a heavy duty extension cord rated for 15 amps minimum – DO NOT use an ordinary extension cord. To provide continued protection against the risk of electric shock, connect to properly grounded outlet only.

IMPORTANT

This product is NOT for space heating purposes.

IMPORTANT

Always be sure that your floor sanitizer is UNPLUGGED from the wall receptacle prior to filling the water tank.

!CAUTION

The SI-35 emits steam at 212˚F to sanitize the area of use. This means that the steam head, Ultra-Microfiber Pads and Gliding Attachment get very hot during use. Care should be taken when using this appliance and DO NOT touch them during use except in the approved manner as outlined in this manual.

www. haanusa . com 877 - HAAN DIRECT / 877 - 422 - 6347 pg 7