Pioneer DEX-P99RS operation manual Fine-adjusting equalizer curve, Using the auto-equalizer

Section

03Audio Adjustments

2Push MULTI-CONTROL left or right to select the equalizer curve you want to re- call.

Each time MULTI-CONTROL is pushed left or right, equalizer curve is recalled in the follow- ing order.

MEMORY1 (memory 1)—MEMORY2 (mem- ory 2)—MEMORY3 (memory 3)—MEMORY4 (memory 4)—MEMORY5 (memory 5)—FLAT

(flat)

# When FLAT is selected, no supplement or cor- rection is made to the sound. This is useful to check the effect of the equalizer curves by switch- ing alternatively between FLAT and a set equali- zer curve.

Copying the equalizer curve

1Use MULTI-CONTROL to select EQ 1 in the audio function menu.

Refer to Introduction of audio adjustments on page 24.

2Push MULTI-CONTROL left or right to select the equalizer curve you want to copy.

3Press MULTI-CONTROL and hold to copy the selected equalizer curve.

4Push MULTI-CONTROL left or right to select the storage area (MEMORY1 to MEMORY5).

5Press MULTI-CONTROL and hold to store the equalizer curve.

Fine-adjusting equalizer curve

You can perform 31–band level adjustment to achieve the optimum acoustic characteristics for your vehicle’s interior environment.

1Select the storage area (MEMORY1 to MEMORY5).

Refer to Copying the equalizer curve on this page.

#If an equalizer curve has already been stored in memory, it will be overwritten by the newly ad- justed equalizer curve.

2Use MULTI-CONTROL to select EQ 2 in the audio function menu.

Refer to Introduction of audio adjustments on page 24.

3Push MULTI-CONTROL left or right to select the equalizer band to adjust.

Each time MULTI-CONTROL is pushed left or right, equalizer bands are selected in the fol- lowing order.

20Hz—25Hz—31.5Hz—40Hz—50Hz—63Hz

—80Hz—100Hz—125Hz—160Hz—200Hz— 250Hz—315Hz—400Hz—500Hz—630Hz— 800Hz—1k—1.25k—1.6k—2kHz—2.5k— 3.15k—4k—5k—6.3k—8k—10k—12.5kHz— 16k—20k

4Push MULTI-CONTROL up or down to adjust the level of the equalizer band. Each time MULTI-CONTROL is pushed up or down, the level of the equalization band in- creases or decreases.

+12 to –12 is displayed as the level is in-

creased or decreased.

# You can then select another band and adjust the level.

5Equalizer curve is automatically stored in memory.

Using the auto-equalizer

The auto-equalizer is the equalizer curve cre- ated by auto TA and EQ (refer to Auto TA and EQ (auto-time alignment and auto-equalizing) on the next page).

You can turn the auto-equalizer on or off.

1Use MULTI-CONTROL to select A.EQ in the audio function menu.

Refer to Introduction of audio adjustments on page 24.

30 En