Pioneer DEX-P99RS Recalling or copying equalizer curves, Adjusting the time alignment

	Section
Audio Adjustments	03

2Push MULTI-CONTROL left or right to select the time alignment.

Each time MULTI-CONTROL is pushed left or right, time alignment is selected in the follow- ing order:

Initial (initial)—Custom (custom)—AutoTA (auto-time alignment)—OFF (off)

!Initial is the factory supplied time align- ment.

!Custom is an adjusted time alignment that you created.

!AutoTA is the time alignment created by

auto TA and EQ. (Refer to Auto TA and EQ (auto-time alignment and auto-equalizing) on page 31.)

#You cannot select AutoTA if auto TA and EQ has not been carried out. In this case, Please Set Auto TA appears.

Adjusting the time alignment

You can adjust the distance between each speaker and the selected position.

!An adjusted time alignment is memorized in Custom.

1Use MULTI-CONTROL to select TA1 in the audio function menu.

Refer to Introduction of audio adjustments on page 24.

2Press MULTI-CONTROL to select a unit of distance.

Each press of MULTI-CONTROL selects the unit of distance in the following order: (cm) (centimeter)—(inch) (inch)

3Use MULTI-CONTROL to select TA2 in the audio function menu.

Refer to Introduction of audio adjustments on

page 24.

# Can't Adjust TA. Set POS. FL or FR appears when neither Left nor Right is selected in the po-

sition selector mode (POSI).

# When selecting OFF in TA1, you cannot switch to TA2.

4Push MULTI-CONTROL left or right to select the speaker to be adjusted.

Each time MULTI-CONTROL is pushed left or right, the speaker is selected in the following order:

High L (high-range left)—High R (high-range right)—Mid L (middle-range left)—Mid R (middle-range right)—Low L (low-range left)— Low R (low-range right)—SW L (subwoofer left)—SW R (subwoofer right)

5Push MULTI-CONTROL up or down to adjust the distance between the selected speaker and the listening position.

Each time MULTI-CONTROL is pushed up or down, the distance increases or decreases. 394.75cm to 0.00cm is displayed as the dis- tance is increased or decreased, if you have selected centimeters ((cm)).

155.39inch to 0.00inch is displayed as the dis- tance is increased or decreased, if you have

selected inches ((inch)).

# You can adjust the distance for the other speakers in the same way.

6Press B to cancel the time alignment mode.

Recalling or copying equalizer curves

The equalizer lets you adjust the equalization to match the car’s interior acoustic character- istics as desired.

It is possible to store the adjusted equalizer curve in the memory, or recall the stored equalizer curve from the memory.

Recalling the equalizer curve

1Use MULTI-CONTROL to select EQ 1 in the audio function menu.

Refer to Introduction of audio adjustments on page 24.

Audio Adjustments

En 29