Pioneer DEX-P99RS Initial Settings, Switching the face auto open, Setting the clock

Section

04 Initial Settings

3	Press MULTI-CONTROL to turn the se-	Switching the face auto open
lected speaker on.		To protect against theft, this unit features de-
#	To turn off, press MULTI-CONTROL again.

	tachable front panel. To detach the front panel
	easily, the front panel opens automatically.
Setting the clock	This function is on as a default.

Use these instructions to set the clock.

1Use MULTI-CONTROL to select Clock in the initial setting menu.

Refer to Adjusting initial settings on the pre- vious page.

2Push MULTI-CONTROL left or right to select the segment of the clock display you wish to set.

Pushing MULTI-CONTROL left or right will se- lect one segment of the clock display: Hour—Minute

As you select segments of the clock display, the selected segment blinks.

3Push MULTI-CONTROL up or down to

put a clock right.

# You can match the clock to a time signal by pressing MULTI-CONTROL.

!If 00 to 29, the minutes are rounded down. (e.g., 10:18 becomes 10:00.)

!If 30 to 59, the minutes are rounded up. (e.g., 10:36 becomes 11:00.)

Switching the warning tone

If the front panel is not detached from the head unit within four seconds of turning off the ignition, a warning tone sounds. You can turn off the warning tone.

1Use MULTI-CONTROL to select Warning tone in the initial setting menu. Refer to Adjusting initial settings on the pre- vious page.

2Press MULTI-CONTROL to turn warning

tone on.

# To turn warning tone off, press MULTI-CONTROL again.

1 Use MULTI-CONTROL to select

Face auto open in the initial setting menu. Refer to Adjusting initial settings on the pre- vious page.

2Press MULTI-CONTROL to turn the face

auto open on.

# To turn the face auto open off, press MULTI-CONTROL again.

Switching the auxiliary setting

Auxiliary devices connected to this unit can be activated individually. Set each AUX source to ON when using. For more information about connecting or using auxiliary devices, refer to Using the AUX source on page 41.

1Use MULTI-CONTROL to select AUX1/ AUX2 in the initial setting menu.

Refer to Adjusting initial settings on the pre- vious page.

2Press MULTI-CONTROL to turn AUX1/

AUX2 on.

# To turn AUX off, press MULTI-CONTROL again.

Switching the dimmer setting

To prevent the display from being too bright at night, the display is automatically dimmed when the car’s headlights are turned on. You can turn the dimmer on or off.

1Use MULTI-CONTROL to select Dimmer in the initial setting menu.

Refer to Adjusting initial settings on the pre- vious page.

36 En