| Section |
Available accessories | 06 |
|
|
HD Radioä tuner
Basic Operations
You can use this unit to control an HD Radio tuner (e.g.
For details concerning operation, refer to the HD Radio tuner’s operation manual.
1/ (signal reception status) indicator When digital signal is received, is dis- played. Otherwise, is displayed.
2Channel number
3Band indicator
4Preset number indicator
5Signal level indicator
Shows the radio wave strength.
6Voltage indicator
Shows the battery voltage.
!The level displayed on the voltage indi- cator may differ from the actual voltage level.
7Frequency indicator
8Title name
%Select a band
Press B.
# Band can be selected from among FM1, FM2, FM3 or AM.
%Manual tuning (step by step)
Push
%Seek tuning
Push and hold
Storing and recalling broadcast frequencies
The operation is the same as that of the tuner. (Refer to Storing and recalling broadcast fre- quencies on page 13.)
Switching the display
Desired information can be displayed.
%Press DScrl.
Press D/Scrl repeatedly to switch between the following settings:
Station
#When the tuner has been tuned in to an HD Radio broadcasting, default display is changed into station name instead of frequency.
Introduction to advanced operations
1Press
2Use
FUNCTION.
Turn to change the menu option. Press to se- lect.
The function menu is displayed.
3Turn
BSM (best stations
Function and operation
BSM and Local operations are basically the same as that of the tuner.
Function name Operation
Available accessories
# You can cancel seek tuning by pushing | BSM | Refer to Storing the strongest |
|
|
| broadcast frequencies on page 14. |
|
| |
|
|
| ||
|
|
|
| |
| Local | Refer to Tuning in strong signals |
|
|
| on page 14. |
|
| |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| En | 49 |