Pioneer DEX-P99RS operation manual 34 En

Section

03Audio Adjustments

8Press MULTI-CONTROL to select a posi- tion.

Each press of MULTI-CONTROL selects set- tings in the following order:

Front left (front left)—Front right (front right) Select the position for the seat on which the microphone is placed.

9Turn MULTI-CONTROL to select

Select N/W mode in the auto TA and EQ menu.

10Press MULTI-CONTROL to select a net- work mode.

Each press of MULTI-CONTROL selects set- tings in the following order:

Auto N/W (auto)—Custom N/W (custom)

# If you want to carry out auto TA and EQ based on previously customized network settings, select

Custom N/W. Otherwise, select Auto N/W.

# If manually adjusted value is not suitable for the actual specifications of the speakers, auto- time alignment and auto-equalizer may not per- form properly.

11Turn MULTI-CONTROL to select

Auto TA & EQ stop in the auto TA and EQ menu.

12Press MULTI-CONTROL to start the auto TA and EQ.

13Get out of the car and close the door within 10 seconds when the 10-second count-down starts.

The measurement tone (noise) is outputted from the speakers, and auto TA and EQ be-

gins.

# To stop auto TA and EQ, press

MULTI-CONTROL again.

# To cancel auto TA and EQ part way through, press B.

14When auto TA and EQ is completed, Complete is displayed.

When correct measurement of car interior acoustic characteristics is not possible, an error message is displayed. (Refer to Under-

standing auto TA and EQ error messages on page 69.)

15Press B to cancel the auto TA and EQ mode.

16Store the microphone carefully in the glove compartment.

Store the microphone carefully in the glove compartment or any other safe place. If the microphone is subjected to direct sunlight for an extended period, high temperatures may cause distortion, color change or malfunction.

Note

Make sure you have disconnected the micro- phone before pressing h/Open to open or close the panel (an alert sounds if the mic is still con- nected).

34 En