Pioneer DEX-P99RS operation manual Adjusting the brightness, Adjusting the illumination color

	Section
Initial Settings	04

2Press MULTI-CONTROL to turn dimmer

on.

# To turn dimmer off, press MULTI-CONTROL again.

Adjusting the brightness

You can adjust the display brightness.

1Use MULTI-CONTROL to select Brightness in the initial setting menu. Refer to Adjusting initial settings on page 35.

2Push MULTI-CONTROL left or right to adjust the brightness level.

0to 15 is displayed as the level is increased or

decreased.

# When dimmer is functioning, the brightness level can be adjusted 0 to 10.

Adjusting the illumination color

You can create an illumination color by adjust- ing the level of the three primary colors, which are red, green and blue.

!This function can be used only when Custom is selected in Illumination 1.

1Use MULTI-CONTROL to select Illumination 2 in the initial setting menu. Refer to Adjusting initial settings on page 35.

2Push MULTI-CONTROL left or right to select the color to adjust.

R (red)—G (green)—B (blue)

3Push MULTI-CONTROL up or down to adjust the level of color.

4to 0 is displayed as the level is increased or decreased.

Initial Settings

Selecting the illumination color

You can select the illumination color from among White, Red, Amber, Green and Blue. Also, you can adjust brightness of each color.

1Use MULTI-CONTROL to select Illumination 1 in the initial setting menu. Refer to Adjusting initial settings on page 35.

2Push MULTI-CONTROL left or right to select the desired illumination color.

Each time MULTI-CONTROL is pushed left or right, the illumination color is selected in the following order:

White (white)—Red (red)—Amber (amber)— Blue (blue)—Green (green)—Custom (cus-

tom)

# If you select Custom, you can adjust the level of three primary colors such as red, green and blue. For details, Adjusting the illumination color on this page.

3Push MULTI-CONTROL up or down to adjust the brightness level.

+1 to –1 is displayed as the level is increased or decreased.

Setting the illumination interlock

This unit’s button illumination can be inter- locked with either the ignition key or the vehi- cle light switch. In this setting, you can select the appropriate option.

1Use MULTI-CONTROL to select ILL line in the initial setting menu.

Refer to Adjusting initial settings on page 35.

2Press MULTI-CONTROL to turn this func- tion on.

When this function is on, the button illumina- tion is interlocked with the vehicle light switch.

When this function is off, the button illumina-

tion is interlocked with the ignition switch.

# To turn off, press MULTI-CONTROL again.

En 37