Pioneer DEX-P99RS Connecting a Bluetooth audio player, Playing songs on a Bluetooth audio player

	Section
Available accessories	06

#Pause is the same as that of the built-in CD player. (Refer to Pausing playback on page 17.)

Notes

!To return to the ordinary display, press B.

!If a Bluetooth audio player is not connected to this unit yet, Connection open and

Device info. appear in the function menu and other functions are not available.

!If a Bluetooth audio player is connected via AVRCP (Audio/Video Remote Control Profile), Connection open does not appear in the function menu.

!If a Bluetooth audio player is connected via A2DP (Advanced Audio Distribution Profile) , only Disconnect audio and Device info. ap- pear in the function menu.

!If you do not operate functions other than Connection open and Disconnect audio within about 30 seconds, the display is auto- matically returned to the ordinary display.

Connecting a Bluetooth audio player

1Use MULTI-CONTROL to select Connection open in the function menu. Refer to Function and operation on the previous page.

2Press MULTI-CONTROL to open the con- nection.

Always waiting is displayed. This unit is now on standby for connection from Bluetooth audio player.

If your Bluetooth audio player is set ready for Bluetooth wireless connection, connection to this unit is automatically established.

Note

Before you can use audio players you may need to enter the PIN code into this unit. If your player requires a PIN code to establish a connection, look for the code on the player or in its accompa- nying documentation. Refer to Entering PIN code for Bluetooth wireless connection on page 39.

Playing songs on a Bluetooth audio player

1Use MULTI-CONTROL to select Play in the function menu.

Refer to Function and operation on the previous page.

2Press MULTI-CONTROL to start play- back.

Stopping playback

1Use MULTI-CONTROL to select Stop in the function menu.

Refer to Function and operation on the previous page.

2Press MULTI-CONTROL to stop the play- back.

Disconnecting a Bluetooth audio player

1Use MULTI-CONTROL to select Disconnect audio in the function menu. Refer to Function and operation on the previous page.

2Press MULTI-CONTROL to disconnect the Bluetooth audio player. Disconnected is displayed. The Bluetooth audio player is now disconnected from this unit.

Displaying BD (Bluetooth Device) address

1Use MULTI-CONTROL to select Device info. in the function menu.

Refer to Function and operation on the previous page.

2Push MULTI-CONTROL left to switch to the BD address.

12-digit hexadecimal string is displayed.

Available accessories

En 53