Pioneer DEX-P99RS Before You Start Protecting your unit from theft, Resetting the microprocessor

Models: DEX-P99RS

1 77
Download 77 pages 53.01 Kb
Page 7
Image 7

 

Section

Before You Start

01

 

 

Protecting your unit from theft

The front panel can be detached to deter theft.

!If the front panel is not detached from the head unit within five seconds of turning off the ignition, a warning tone sounds.

!You can turn off the warning tone. Refer to Switching the warning tone on page 36.

Important

!Handle gently when removing or attaching the front panel.

!Avoid subjecting the front panel to excessive shock.

!Keep the front panel out of direct sunlight and high temperatures.

3Put the front panel into the provided protective case for safe keeping.

Attaching the front panel

1Make sure the inner cover is closed.

2Replace the front panel by clipping it into place.

Before You Start

Removing the front panel

1Press h/Open to open the front panel. If a disc has been inserted to this unit, press- ing and holding h/Open enable to open the front panel without ejecting a disc.

2Press the release button, slide and re- move the front panel toward you.

Take care not to grip it too tightly or to drop the front panel and protect it from contact with water or other fluids to prevent perma- nent damage.

Release button

Resetting the microprocessor

The microprocessor must be reset under the following conditions:

!Prior to using this unit for the first time after installation

!If the unit fails to operate properly

!When strange or incorrect messages ap- pear on the display

%Press RESET with a pen tip or other pointed instrument.

RESET button

En

7

Page 7
Image 7
Pioneer DEX-P99RS Before You Start Protecting your unit from theft, Resetting the microprocessor, Removing the front panel