Pioneer Essential Guide for DEX-P99R and DEX-P99RS Audio System Setup

Section
04		Initial Settings
	Correcting distorted sound		! Sound from this system returns to normal
	When listening to a CD or other source on		when the muting or attenuation is can-
			celed.
	which the recording level is high, setting the
	level of each frequency to high may result in		1 Use MULTI-CONTROL to select Mute in
	distortion. You can switch the digital attenua-		the initial setting menu.
	tor to low to reduce distortion.		Refer to Adjusting initial settings on page 35.
	! Sound quality is better at the high setting		2 Press MULTI-CONTROL to switch the tel-
		so this setting is usually used.
			ephone muting/attenuation.
	1 Use MULTI-CONTROL to select		Each press of MULTI-CONTROL selects set-
	Digital ATT in the initial setting menu.		tings in the following order:
	Refer to Adjusting initial settings on page 35.		20dB ATT (20 dB attenuation)—TEL mute
	2 Press MULTI-CONTROL to select the di-		(mute)—10dB ATT (10 dB attenuation)
			! 20dB ATT has a stronger effect than
	gital attenuator level.
			10dB ATT.
	Pressing MULTI-CONTROL repeatedly will
	switch between High (high) and Low (low)
	and that status will be displayed.		Setting the polarity of the
			door operation

Resetting the audio functions

You can reset all audio functions.

1Use MULTI-CONTROL to select Audio Reset in the initial setting menu. Refer to Adjusting initial settings on page 35.

2Press MULTI-CONTROL.

Reset data? appears in the display.

3Push MULTI-CONTROL right. Are You Sure? appears in the display.

4Press MULTI-CONTROL to reset audio functions.

Complete appears in the display and audio

functions are reset.

# To cancel this function on the way, press B.

Before using door mute function, it is neces- sary to set the polarity of the door operation. Check the polarity of the door opening opera- tion, and set it correctly.

1Use MULTI-CONTROL to select Door mute 1 in the initial setting menu. Refer to Adjusting initial settings on page 35.

2Press MULTI-CONTROL to select setting. Each press of MULTI-CONTROL selects set- tings in the following order:

High (high)—Low (low)

!If the polarity changes to + (positive) when the door is opened, select High.

!If the polarity changes to – (negative) when the door is opened, select Low.

Switching the sound muting/attenuation

Sound from this system is muted or attenu- ated automatically when the signal from the equipment with mute function is received.

!The sound is muted or attenuated, MUTE or ATT are displayed and no audio adjust- ment is possible.

Setting the door mute setting

Sound from this system is muted or attenu- ated automatically when the vehicle door is opened.

!Sound from this system returns to normal when the muting or attenuation is can- celed.

38 En