Audio Adjustments

# If auto TA and EQ has not been carried out,

Adjusting source levels

Please Set Auto EQ appears. This indicates that

SLA (source level adjustment) lets you adjust

you cannot turn this function on.

the volume level of each source to prevent ra-

 

2 Press MULTI-CONTROL to turn the auto-

dical changes in volume when switching be-

equalizer on.

tween sources.

# To turn auto-equalizer off, press

! Settings are based on the FM volume level,

MULTI-CONTROL again.

which remains unchanged.

 

1 Compare the FM volume level with the

Using the sound retriever

level of the source you wish to adjust.

 

Section

03

Audio Adjustments

The sound retriever function automatically en- hances compressed audio and restores rich sound.

1Use MULTI-CONTROL to select S.Rtrv in the audio function menu.

Refer to Introduction of audio adjustments on page 24.

2Press MULTI-CONTROL to select the de- sired setting.

OFF (off)—MODE1—MODE2

# MODE1 is effective for the low compression

rate.

# MODE2 is effective for the high compression

rate.

# This function can be used for the audio data

stored in a CD, DVD, Bluetooth Audio, iPod, USB or AUX.

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.

1Use MULTI-CONTROL to select LOUD in the audio function menu.

Refer to Introduction of audio adjustments on page 24.

2Press MULTI-CONTROL to turn loudness

on.

# To turn loudness off, press MULTI-CONTROL again.

2Use MULTI-CONTROL to select SLA in the audio function menu.

Refer to Introduction of audio adjustments on page 24.

3Push MULTI-CONTROL up or down to adjust the source volume.

Each time MULTI-CONTROL is pushed up or down, source volume increases or decreases. +4 to –4 is displayed as the source volume is increased or decreased.

Notes

!The AM volume level can also be adjusted with source level adjustments.

!The built-in CD player and the multi-CD player are set to the same source level adjustment volume automatically.

!External unit 1 and external unit 2 are set to

the same source level adjustment volume automatically.

Auto TA and EQ (auto-time alignment and auto- equalizing)

The auto-time alignment is automatically ad- justed for the distance between each speaker and the listening position.

The auto-equalizer automatically measures the car interior acoustic characteristics, and then creates the auto-equalizer curve based on that information.

En 31

Page 31
Image 31
Pioneer DEX-P99RS operation manual Adjusting source levels, Using the sound retriever, Adjusting loudness