Pioneer DEX-P99RS Initial Settings Adjusting initial settings, Selecting the display language

	Section
Initial Settings	04

Adjusting initial settings

Using the initial settings, you can customize various system settings to achieve optimal per- formance from this unit.

tooth adapter (e.g., CD-BTB200) is connected to this unit.

#To cancel initial settings, press B.

1Function display

Shows the function status.

1Press SRC/Off and hold until the unit turns off.

2Press MULTI-CONTROL and hold until the initial setting menu appears in the dis- play.

3Turn MULTI-CONTROL to select one of the initial settings.

Turn MULTI-CONTROL to switch between the functions in the following order.

Language select (language selection)— SP connection (speaker setting)—Clock (clock)—Warning tone (warning tone)— Face auto open (face auto open)—AUX1 (auxiliary input 1)—AUX2 (auxiliary input 2)— Dimmer (dimmer)—Brightness (brightness)

—Illumination 1 (illumination select)— Illumination 2 (custom illumination)—

ILL line (illumination interlock)—Digital ATT (digital attenuation)—Audio Reset (audio reset)—Mute (sound muting/attenuation)— Door mute 1 (intelligent mute polarity setting)

—Door mute 2 (intelligent mute setting)— Reverse mode (reverse mode)—Ever-scroll (ever scroll)—BT AUDIO (Bluetooth audio)— Pin code input (pin code input)—

BT Version Info. (Bluetooth version informa- tion)

Use the following instructions to operate each

particular setting.

# BT AUDIO, Pin code input and

BT Version Info. can be selected only when Blue-

Selecting the display language

For your convenience, this unit equips multi- ple language display. You can select the lan- guage best suited to your first language.

1Use MULTI-CONTROL to select Language select in the initial setting menu. Refer to Adjusting initial settings on this page.

2Press MULTI-CONTROL to select the lan- guage.

Each press of MULTI-CONTROL selects lan-

guages in the following order: English—Français—Español

Setting the speakers

You need to set the speakers used with this system.

When this setting is performed correctly, this unit reproduces high-definition sound suited to your system.

!You cannot change the middle-range speaker setting. (The middle-range speaker is always on.)

!If this setting is adjusted after performing auto-time alignment and auto-equalizing function, perform auto-time alignment and auto-equalizing again.

1 Use MULTI-CONTROL to select

SP connection in the initial setting menu. Refer to Adjusting initial settings on this page.

2Push MULTI-CONTROL left or right to select the speaker to be adjusted.

Each time MULTI-CONTROL is pushed left or right, the speaker is selected in the following order:

Subwoofer (subwoofer)—Low range (low range speaker)—High range (high range speaker)

Initial Settings

En 35