Pioneer DEX-P99RS operation manual Using compression and bass emphasis, Using ITS playlists

Section

06Available accessories

!After track or disc scanning is finished, nor- mal playback of the tracks begins again.

Using compression and bass emphasis

You can only use these functions with a multi- CD player that supports them.

COMP (compression) and DBE (dynamic bass emphasis) functions lets you adjust the sound playback quality of the multi-CD player.

1Use MULTI-CONTROL to select Compression in the function menu. Refer to Introduction to advanced operations

on the previous page.

# If the multi-CD player does not support COMP/DBE, No COMP is displayed when you at- tempt to select it.

2Press MULTI-CONTROL to select your fa- vorite setting.

COMP OFF—COMP 1—COMP 2— COMP OFF—DBE 1—DBE 2

3Select the desired track by pushing MULTI-CONTROL left or right.

4Push MULTI-CONTROL up to store the currently playing track in the playlist. Memory complete is displayed and the cur- rently playing selection is added to your play- list.

5Press B to return to the playback dis- play.

Note

After data for 100 discs is stored in memory, data for a new disc will overwrite the oldest one.

Playback from your ITS playlist

ITS play lets you listen to the tracks that you have entered into your ITS playlist. When you turn on ITS play, tracks from your ITS playlist in the multi-CD player begin to play.

1 Select the repeat range.

Refer to Playing tracks in random order on page 16.

Using ITS playlists

ITS (instant track selection) lets you make a playlist of favorite tracks from the multi-CD player magazine. After you have added your fa- vorite tracks to the playlist, you can turn on ITS play and play just those selections.

You can use ITS to enter and play back up to 99 tracks per disc from up to 100 discs (with the disc titles). (With multi-CD players sold be- fore the CDX-P1250 and CDX-P650, up to 24 tracks can be stored in the playlist.)

Creating a playlist with ITS programming

1Play a CD that you want to program. Push MULTI-CONTROL up or down to select the CD.

2Use MULTI-CONTROL to select

ITS memo in the function menu.

Refer to Introduction to advanced operations on the previous page.

2Use MULTI-CONTROL to select ITS play mode in the function menu. Refer to Introduction to advanced operations on the previous page.

3Press MULTI-CONTROL to turn ITS play

on.

ITS play appears in the display. Playback be- gins of those tracks from your playlist within the previously selected M-CD repeat or

Disc repeat ranges.

# If no tracks in the current range are pro- grammed for ITS play, then ITS empty is dis-

played.

# To turn ITS play off, press MULTI-CONTROL again.

Erasing a track from your ITS playlist

You can delete a track from your ITS playlist if ITS play is on.

64 En