Haan SI-35 user manual Care & Maintenance, Helpful Haan Hint, Haan Direct

Care & Maintenance

IMPORTANT

Always be sure that your floor sanitizer is UNPLUGGED from the wall receptacle prior to cleaning or before emptying the water tank.

HELPFUL HAAN HINT: Never leave the appliance in one spot on any surface for any period of time. Always place your Floor Sanitizer on the Floor Protector/Resting Mat when stationary and make sure the floor sanitizer is turned off not in use.

CAUTION

Do not immerse your Floor Sanitizer in water or any other liquid.

HELPFUL HAAN HINT:

DO NOT use fabric softener when washing the Ultra- Microfiber Pads as this will compromise the absorbancy of the microfiber.

www. haanusa . com

1)Turn your Floor Sanitizer off and unplug the unit from the electrical outlet.

2)Place the unit on the Floor Protector/Resting Mat.

3)Prepare to store the Floor Sanitizer by looping the power cord around the pivoting cord wraps found on the handle pole and snap the plug securely onto the cord when complete.

4)Let your Floor Sanitizer cool for five (5) minutes before removing the Ultra-Microfiber pad.

5)Always empty the water tank once you have finished using your Floor Sanitizer.

6)Remove the Ultra-Microfiber pad and wash in warm water with a mild detergent. Never use bleach or fabric softener when cleaning the Ultra- Microfiber pad. The Ultra-microfiber pad can be washed in a washing machine set on the gentle cycle. We recommend that you air dry the pads for 24 hours, but they can also be dried in a clothes dryer on a low heat setting.

7)To clean the body of your Floor Sanitizer wipe it down with a damp cloth.

8)Store the unit upright in a protected dry area, standing it on the Floor Protector/Resting Mat, or by hanging it by the Storage Hook.

877 - HAAN DIRECT / 877 - 422 - 6347 pg 13