!CAUTION
The
Fig 11
HELPFUL HAAN HINT: While using the Floor Sanitizer with the Gliding Tray will not lift all
Operating Instructions: (cont)
How to use the Glide Attachment for Fresh Stains:
The Glide Attachment can be used to break up fresh stains on carpeting, rugs, upholstery, pet cushions and other soft surfaces. Follow the instructions below.
1)With the Glide Attachent on the Floor Sanitizer, press the ‘Steam ON/OFF’ button. It takes approximately 30 seconds for the Floor Sanitizer to heat up.
2)Place the Floor Sanitizer over the stain and hold it in place for a few seconds to allow the steam to penetrate the area of the stain.
3)Push and pull the floor sanitizer slowly across the area to work the steam into the stain.
4)Carefully remove the Glide Attachment by using your foot to snap the attachment off the steam head. The attachment is designed for this easy ‘No Touch’ method of removal. (Fig 11)
5)Place a dry
6)When you have finished using the unit, turn it ‘OFF’, place it on the Floor Protector/Resting Mat and wait until the Floor Sanitizer cools down for approximately five (5) minutes before removing the
7)Store the
pg 12 | 877 - HAAN DIRECT / 877 - 422 - 6347 | www. haanusa . com |