SPANISH ITALIAN GERMAN FRENCH ENGLISH
If during the use happen that : | Explanation and suggested solution : | ||
|
|
|
|
• | Camera goes OFF. | • | Battery are discharge, please change. |
|
|
| Picture already in memory will be kept. |
• | Flash settled, but no work and goes OFF. | • | Battery are discharge, please change. |
|
|
|
|
• | Camera goes locked. | • | It might be caused by a too fast use of all the buttons, |
|
|
| after making a photo. See below |
• Camera is locked, with LED or LCD | • | Switch OFF the camera, wait for some seconds and | |
| display due to unexpected data error. |
| switch it ON; if the problem still exist please follow |
• “ALL” flashing to long time. |
| procedure as below: | |
• | “Err” flashing. | • | Remove the batteries. |
• | Key are disable. | • | Remove the SmartMedia card (if any). |
|
| • | Wait for approximately 30 seconds. |
|
| • | Install two new batteries. |
|
| • | Turn ON the camera and connect it to a TV by using |
|
|
| the included video cable. |
|
| • | Select ‘Delete All’ from TV ‘Main menu’. Camera |
|
|
| will display “Frt” message, any key must not be |
|
|
| pressed during this procedure, wait completion until |
|
|
| TV and camera will return back to the ‘Main menu’. |
|
| • | Turn OFF the camera and unplug the video cable |
|
|
| from TV. |
|
| • | Install the SmartMedia card (if any). |
|
| • | Turn the camera on and it can now resume to normal |
|
|
| operation. |
|
|
| |
• Photos number and LED flashing. | • | This is normal, the camera is busy because the | |
• After a quick use of the shutter (a lot |
| previous taken photos are going to be stored into | |
| of pictures in a short time) the "bsy" |
| the camera; wait few seconds before making others |
| message appear at next. |
| photo, till the LED and the progressive (or regressive) |
|
|
| number stop to flashing. |
|
|
|
|
SPANISH ITALIAN GERMAN FRENCH ENGLISH
PORTUGUESE | 16 |
|
PORTUGUESE