Getting Started, Taking Pictures | Oregon Scientific DS6300 specs

GETTING STARTED

BATTERY INSTALLATION

1.Open the battery compartment cover.

2.Insert batteries according to the correct polarity (+ and -) as shown on the inside of the battery compartment.

3.Close the battery compartment cover.

TURNING THE POWER ON / OFF

1.To turn the camera on, press POWER ON / OFF until a beep is heard and the LCD screen is on. The camera is now ready to take pictures.

2.To turn the camera off, press POWER ON / OFF until the camera beeps and the LCD screen is blank.

SLEEP MODE

1.When the camera is turned on but is not being used for 60 seconds, it will automatically go into sleep mode to save battery power.

2.To re-activate the camera from sleep mode, press POWER ON / OFF once. The camera is ready to take the next picture.

TAKING PICTURES

1.Aim the camera and compose your image by looking through the viewfinder.

2.Press SHUTTER down. A buzz sound will be heard indicating that a picture has been taken.

3.The LCD screen will show the number of pictures taken.

NOTE The camera stores all pictures in the built-in memory or Secure Digital (SD) memory card.

PREVIEW / PLAYBACK MODE ONSCREEN MENUS

PREVIEW MODE MENU

Follow the flowchart below to access the camera’s Preview Mode onscreen menu options (Mode, Self-Timer, Flash, Exposure, Setup) and select / adjust their respective settings.

2976 x 2232

2560 x 1920

2048 x 1536

1280 x 960