Nikon S9100 user manual Turning On and Off the Camera, Power-on Lamp turns, Again. When

Turning On and Off the Camera

Press

tile power

switc:h

to

turn

on

tile

camera.

Tile

power-on

lamp

(green)

will

light,

and

then

tile

monitor

will

turn

on

(the power-on

lamp turns

offwhen

the

monitor

turns

on). To turn

of[the

camera,

press

the

power

switch

again. When

the

camera

is turned

of[, the

_m.

power-on

lamp and

the

monitor

will

turn

of[.

if the

camera

is turned off, hold down

the []

button to turn the camera on in

playback

mode

(_

30).

[] Power Saving Function (Auto Off)

If no operations are per_rmed _r a while, the monitor will turn off, the camera will enter standby

mode, and the power on lamp will blink. If no operations are per_rmed _r another three minutes, the camera will turn off automatically,

When the power on lamp is blinking, the following operations will turn the monitor back on, Pressing the power switch, shutter release button, [] button, or • (_ movie record) button Rotating the mode dial

• in shooting or playback mode, the camera will enter standby mode in about one minute (default setting).

• The time allowed to elapse before the camera enters standby mode can be changed from the

Auto off option (_ 184) in the setup menu (_ 169),

19