Yamaha RX-V595A owner manual Frequency Step switch China model only, For Canadian Customers

Page 6

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

1.To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

2.Install this unit in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, do not expose the unit to rain or water.

3.Never open the cabinet. If something drops into the set, contact your dealer.

4.Do not use force on switches, controls or connection wires. When moving the unit, first disconnect the power plug and the wires connected to other equipment. Never pull the wires themselves.

5.The openings on the cover assure proper ventilation of the unit. If these openings are obstructed, the temperature inside the unit will rise rapidly. Therefore, avoid placing objects against these openings, and install the unit in a well-ventilated area to prevent fire and damage.

<China model only>

Be sure to allow a space of at least 20 cm behind, 20 cm on both sides and 30 cm above the top panel of the unit to prevent fire and damage.

6.The voltage used must be the same as that specified on this unit. Using this unit with a higher voltage than specified is dangerous and may result in fire or other accidents. YAMAHA will not be held responsible for any damage resulting from the use of this unit with a voltage other than that specified.

7.Digital signals generated by this unit may interfere with other equipment such as tuners, receivers and TVs. Move this unit farther away from such equipment if interference is observed.

8.Always set the VOLUME control to “ ” before starting the audio source play. Increase the volume gradually to an appropriate level after playback has been started.

9.Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

10.Be sure to read the “TROUBLESHOOTING” section regarding common operating errors before concluding that the unit is faulty.

11.When not planning to use this unit for a long period of time (e.g., a vacation), disconnect the AC power plug from the wall outlet.

12.To prevent lightning damage, disconnect the AC power plug and disconnect the antenna cable when there is an electrical storm.

13.Grounding or polarization – Precautions should be taken so that the grounding or polarization of the unit is not defeated.

14.AC outlet

Do not connect audio equipment to the AC outlet on the rear panel if that equipment requires more power than the outlet is rated to provide.

15.Voltage Selector (China model only)

The voltage selector on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply.

Voltages are 110/120/220/240 V AC, 50/60 Hz.

This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. This state is called the standby mode. In this state, this unit is designed to consume a very small quantity of power.

FREQUENCY STEP switch (China model only)

Because the interstation frequency spacing differs in different areas, set the FREQUENCY STEP switch (located at the rear) according to the frequency spacing in your area. Before setting this switch, disconnect the AC power plug of this unit from the AC outlet.

IMPORTANT

Please record the serial number of this unit in the space below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to wide slot and fully insert.

This Class B digital apparatus complies with Canadian ICES-003.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents RX-V595a Safety Instructions Explanation of Graphical SymbolsFCC Information for US customers only For US customers onlyImportant Notice do not Modify this Unit Supplied Accessories Accessoires Fournis Features ContentsFrequency Step switch China model only China model onlyFor Canadian Customers Features of the Sound Effects IntroductionDolby Digital Dolby Pro Logic + 2 Digital Sound Fields Dolby Digital or DTS + 3 Digital Sound FieldsControls and Their Functions Front PanelBass TrebleDisplay Panel Speaker Setup Speaker PlacementSpeakers to be Used Connections Connections with Other ComponentsGND terminal for turntable use Connecting to Digital Coaxial AND/OR Optical Terminals Connecting to S Video Terminals Connecting to Video AUX Terminals on the Front PanelConnecting to AN External Decoder Impedance Selector SwitchImpedance Selector Subwoofer connection Connecting SpeakersMain speaker connections Rear speaker connectionsHow to connect Connecting the AM loop antenna Antenna ConnectionsGND terminal Description of Each Function Cntr Center Speaker Adjustments Before Using this UnitSelecting the Output Modes Rear Rear SpeakersAdjustment Method Speaker Balance Adjustment Set BASS, Treble and Balance to the 0 position English To Play a Source When using the remote controlBasic Operation To play a tape or an MD Press TAPE/MD MON / EXT. DecoderWhen you have finished using this unit Adjust the volume to the desired output levelDTS Switching the input mode for DVD/LD and TV/DBSAuto AnalogTo Record a Source on TAPE, MD or Video Cassette Tuning Automatic TuningPress Tuning Mode Manual Preset Tuning To store stationsTo recall a preset station Memory back-upAutomatic Preset Tuning for FM stations only When automatic preset tuning is completedExchanging Preset Stations Example120 90 60 Setting the Sleep TimerTo cancel the selected Sleep time To set the Sleep timeFor movie or audio/video sources Program FeaturesSound Field Program Dolby PRO LogicFor Hi-Fi Audio sources To Cancel the Sound Effect 3 4Adjusting the Delay Time and Speaker Output Levels Adjustment methodAdjusting the delay time Program Control range ms Preset valueSpeaker Control range dB Preset value Adjustments in the SET Menu Mode Guard Memory guard Delay Adjusting the delay of center sounds dialog, etcSelecting the mode of the TV/DBS input InputRemote Control Components which can be controlledAMP/TUN DSPTAPE/MD TapeDVD/LD DVD MenuInput function if you have preset Code for your TV VCRCBL/DBS Battery installation Battery replacementRemote control operation range To control your components MD recorder, DVD player, TV, etc Setup CodesPresetting the remote control To use a second and third VCRTroubleshooting Symptom Cause RemedyDecoder Dolby PRO Logic Enhanced When playing back a source encoded with DTS Specifications Audio SectionFM Section General 105 Cable DBS TunerCD Player DVD PlayerLD Player MD Recorder108 DSS BBT110 V403280 Quick Reference Card DVD Menu VCR CBL/DBS

RX-V595A specifications

The Yamaha RX-V595A stands out as a distinguished AV receiver in the realm of home theater systems, renowned for its blend of performance, features, and versatility. Launched during the late 1990s, the RX-V595A has earned a reputation for delivering high-quality audio and video experiences, making it a favored choice among enthusiasts.

At the heart of the RX-V595A is its robust power amplification, providing 100 watts per channel across five channels. This ensures that it can drive a wide range of speakers, delivering pristine sound quality whether in stereo or surround formats. With Yamaha's proprietary Digital ToP-ART technology, the receiver minimizes signal degradation, which enhances overall audio clarity. Additionally, the inclusion of the Auto Setup and Calibration feature simplifies the installation process, allowing the system to automatically optimize speaker settings based on the room's acoustic characteristics.

One of the standout features of the RX-V595A is its support for multiple surround sound formats. It is equipped with Dolby Digital and DTS decoding, ensuring that users can enjoy their favorite movies and music in immersive surround sound. The receiver's Cinema DSP technology further enriches the listening experience by recreating the ambiance of concert halls, theaters, and other environments, effectively elevating the audio experience.

The RX-V595A also comes with a variety of connectivity options, making it compatible with numerous audio and video components. It is equipped with multiple digital and analog inputs, including both coaxial and optical inputs, enabling easy integration with CD players, game consoles, and other devices. The presence of a built-in AM/FM tuner and a straightforward graphical user interface enhance overall usability and convenience.

Another notable characteristic of the RX-V595A is its well-designed remote control, which provides seamless operation of the receiver and connected devices. The receiver also offers multi-zone capabilities, allowing users to enjoy audio in different rooms simultaneously, which is ideal for larger homes.

In conclusion, the Yamaha RX-V595A is a feature-rich AV receiver that combines audio fidelity, ease of use, and versatile connectivity. Its robust surround sound capabilities, advanced technologies, and user-friendly interface make it an excellent choice for anyone looking to build a high-quality home theater system. Whether for enjoying music, films, or gaming, the RX-V595A continues to impress with its enduring performance and reliability.
Top Page Image Contents