Nikon Image Converter user manual Power Connection, Lanc & Remote Control with the Mini35Digital

Page 12

Power Connection

Connect the cable from the battery plate with the battery input (F) and load battery in the plate. The Connecting Kit uses the same battery type as the camera.

LANC & Remote Control with the Mini35Digital

The Mini35 can also be controlled via a remote control unit. Use the LANC cable to connect the Mini35 via the INPUT connection

(M)with the camera. Then connect the Mini35 via the REMOTE connection (L) with the remote control unit.

7-pin LANC Cable

Red connector – Canon & Sony

Black connector - Panasonic

Canon XL1/XL1S

Sony DSR-PD150 / DCR-VX1000 /

DCR VX2000

The Mini35 can now be controlled:

•Independent & manually by the Mini35 RUN button or

•Both manually via the camera START button or

•Together via a Remote Control System

Panasonic AG-DVX100

The camera has no LANC interface and can only receive commands. So both can be controlled

•Independent & manually by the Mini35 RUN button or

•Together via a Remote Control System

12

Image 12

Contents Image Converter Page Improved features of the Oszi 400 series CongratulationsZGC., Inc +S Technik GmbHContents Delivery Content Basic Module Connecting Kits Preparation Avoid Murphy’s LawItems needed before you begin General Description Pos Description CommentBatt Remote Power Connection Lanc & Remote Control with the Mini35DigitalPin Lanc Cable Canon XL1/XL1S Sony DSR-PD150 / DCR-VX1000Canon XL1 / XL1s Attach the relay lens onto the camera N o Prepare the Mini35Mount the relay lens now attached to ConverterAttach the camera support Camera Test if the back focus is properly adjusted Follow the steps below to adjust the relay back focus Steps Instructions Explanatory NotesSony DSR-PD150 / DCR-VX1000 / DCR-VX2000 Remove all filters, sunshades, adapter rings N Y Camera onto the Mini35Digital image Attach the camera support Focus the 35mm film lens on an object Test if the back focus is properly adjusted Lock the back focus and double check the image Panasonic DVX100 Remove all filters, sunshades, adapter N a S O N Mount the relay lens now attached to Attach the camera support Turn off the AutoFocus and Zoom function Test if the back focus is properly adjusted Lock the back focus and double check Image Maintenance Optional Accessories forMini35Digital Frequently Asked Questions Will the Angle of View of the lens I’m using be affected?My image is vignetted dark frame around image. Why? Does the Mini35Digital require a power supply? Do I need any additional editing equipment? How much light is lost?Is there any prejudice towards the MiniDV format? Can I use 16mm lenses? Can I use Nikon AF lenses?Will the Mini35 control the iris of my Canon EF lenses? Dealers France North American Distributor ChinaTechnical Data ZGC., Inc