Nikon S2 quick start Turn the camera on, Open the sliding lens cover, Auto Power off Stand-by Mode

Turn the camera on

6

Taking Pictures

Turn the camera on

1	Open the sliding lens cover
	Avoid touching the camera lens

when opening the sliding lens cover.

The camera will turn on and the power-on lamp will light.

2	Select	(auto) mode
	Press the mode button until the
	green	mode indicator lights.

The mode button can be used to cycle through shooting modes as follows:

Auto Power off (Stand-by Mode)

If no operations are performed for about five seconds, the monitor will gradually dim to save power. Full brightness can be restored by pressing the shutter-release button or operating any of the controls on the back of the camera. If no opera- tions are performed for about a minute, the monitor will turn off altogether and the camera will enter stand-by mode, further reducing the drain on the battery. The display can be reactivated by pressing the shutter-release button halfway.

See the Guide to Digital Photography for more information on the options avail- able for auto power off.