search for Voices via the "Voice" box. In order for the S90 to show up as an available SYNTHESIZER under the Generator function, you must have installed the VOICE EDITOR FOR S90 on your computer. This will load in the necessary items so that S90 appears on the available Tone Generator list. By clicking on the small chevron next to the word GENERATOR you will be able to select the
S90 as the TONE GENERATOR (shown below):
On the main toolbar of the SQ01 click on SETUP…
•Select TONE GENERATOR....
•Connect the DEVICE/CH "Yamaha USB OUT
•Now open a NEW session by clicking on FILE> NEW on the toolbar of the SQ01.
This will setup a new song with S90 set as the Tone Generator for all MIDI tracks and you can click on the VOICE box and select your sounds using the software's Category Search. Of course, you can set the transmit PORT/CH of the Tracks individually, as necessary, if you are using more than one synthesizer in your setup.
REMOTE CONTROL
In order to get the S90 Remote Control function to work, Port 3 is designated as the communication PORT. Port 1 is always the internal Parts; Port 2 could be for your PLG boards (as explained earlier) and Port 3...is selected for communication with the REMOTE CONTROL functions for the AUDIO MIXER.
On your S90:
•Press UTILITY
•Press F4 CTL ASN (Control Assign)
•Press SF4 REMOTE
•Set this to SQ01
•Press ENTER
•Press SEQ PLAY
•Press MIX to set the S90 in multi-
•Press the REMOTE CONTROL button on the far right front panel to activate Remote functions
In SQ01 under SETUP on the toolbar
•Click REMOTE CONTROL...
If you have SQ01 version 1 it will allow you to set the MIDI communication CHANNEL, and INPUT DEVICE.
•Set the Channel to 16, and the INPUT DEVICE to YAMAHA USB
3