Nikon COOLPIX 700 manual Manual focus, Pressing the button, Focus Distance

Manual focus

In M-REC mode, focus distance can be se- lected manually from a list of preset distances ranging from 0.1m (4in.) to infinity. To set focus distance manually:

1 Measure the distance to your subject.

2 Turn the mode dial to M-REC.

3 Press the zoom buttons (▲▼) while

holding down the button to select a focus distance.

Notes

When manual focus is used with the lens converters available separately for the COOLPIX 700, the actual focus distance may differ from the setting chosen. Check focus in the LCD monitor when using a lens converter.

Focus distance is displayed in the LCD monitor, while the control

panel shows the focus distance together with a flashing icon. A short focus distance can be used to focus the camera on objects at the specified distance. Choose a setting of Inf for a focus distance of infinity. Unlike the autofocus setting of Infinity, manual infinity allows use of the flash. Manual focus can be cancelled by

pressing the button.

Focus Distance

Focus distance is measured from the cover that protects the lens.

Focus distance can be shown in either meters or feet. To change the units used, select CONTROLS from the M-REC menu. To display distances in feet, check the DIST FT item and press the shutter-release button. If this item is not checked, distances are displayed in meters.

Using the Buttons (A-REC, M-REC): Focus Settings - 14 -