McAfee 8.7I manual Property Description

VirusScan® Enterprise software version 8.7i Installation Guide	Installing VirusScan Enterprise
	Using the command line to install program files

Installation properties

Use these properties to customize the command-line installation:

3

Property	Description
ADDLOCAL	Installs specific features to the local computer.
CMASOURCEDIR	Set the source path for the SITELIST.XML file. The default path
	is: %TEMP%\NAITemp.
		Notes and Tips
	The repository list must be located on a local drive and
	cannot be imported from a mapped or a network drive.
ENABLEONACCESSSCANNER	False = A False value cannot be set.
	True = Enable on-access scanner when the installation
	completes (Default).
		Notes and Tips
	If you do not want to enable the on-access scanner, set the
	property to "", an empty string.
	For example: ENABLEONACCESSSCANNER=""
EXTRADATSOURCEDIR	Set the source path for the EXTRA.DAT file. During installation,
	the EXTRA.DAT file is copied into the location where the
	engine files reside.
ICONLOCKDOWN	False = A False value cannot be set.
	True = Do not display any icons.
		Notes and Tips
	„ The default is an empty string.
	„ To display icons, set the property to "", an empty string.
		For example: ICONLOCKDOWN=""
INSTALLDIR	Specifies the installation folder.
		Notes and Tips
	The value consists of the installation path.
LOCKDOWNSHORTCUTS	False = A False value cannot be set.
	True = Do not display any shortcuts under the Start menu.
		Notes and Tips
	„ The default is an empty string.
	„ To allow the shortcuts to be installed, set the property to
		"", an empty string.
		For example: LOCKDOWNSHORTCUTS="".
PRESERVESETTINGS	False = A False value cannot be set.
	True = Preserve settings (Default).

Notes and Tips

„Preserves settings when upgrading from NetShield®, VirusScan, or an earlier version of VirusScan Enterprise.

„If you do not want to preserve settings, set the property to "", an empty string.

For example: PRESERVESETTINGS=""

23