Camera Mode Setting
Picture Resolution
To change Picture Resolution:
1.In Movie/Picture Record Mode, press Enter Button to switch to the main menu screen.
2.Use Right/Left Buttons to select Camera Mode. Submenu of Camera Mode will pop out on the screen.
3.Use Up/Down Buttons to select Resolution then press Enter Button to switch to Resolution submenu.
4.Use Up/Down Buttons to move between three settings – HIGH (3856×2892), STD (2592× 1944), LOW (1600×1200).
5.Press Enter Button to validate the setting and exit.
Display Screen | Video Resolution Option |
|
|
Enter Button
Two in One (Picture Record Mode Only)
With camera set to Two in One mode, you can combine two snapshots into one picture. To enable Two in One:
1.In Movie/Picture Record Mode, press Enter Button to switch to the main menu screen.
2.Use Right/Left Buttons to select Camera Mode. Submenu of Camera Mode will pop out on the screen.
3.Use Up/Down Buttons to select Two in One then press Enter Button to switch to Two in One submenu.
4.Use Up/Down Buttons to choose ON or OFF.
5.Press Enter Button to validate the setting and exit.
17