Kodak DX7630 manual Computer/connectivity problems, Picture quality problems

	Troubleshooting
If...	Try one or more of the following
You cannot take a	■ Turn the camera off, then on again.
picture	■ Depress shutter button all the way (page 8).
	■ Insert a charged battery (page 2).
	■ Wait until the ready light is green before attempting to
	take another picture.
	■ Transfer pictures to the computer (page 42), delete
	pictures from the camera (page 29), switch image storage
	locations (page 24), or insert a card with available
	memory (page 7).

Computer/connectivity problems

If...	Try one or more of the following
The computer does	■ Turn on the camera.
not communicate with	■ Insert a charged battery (page 2).
the camera	■ Make sure USB cable is securely connected on camera and
	computer port (page 42).
	■ Make sure the EasyShare software is installed (page 35).
Slide Show does not	■ Adjust the camera Video Out setting (NTSC or PAL,
run on an external	page 26).
video device	■ Make sure the external device settings are correct (see the
	device’s user’s guide).
Picture quality problems

If...	Try one or more of the following
The picture is too dark	■ Use Fill flash (page 16) or change your position so light is
or underexposed	not behind the subject.
	■ Move so that the distance between you and the subject is
	within the effective flash range (page 16).
	■ To automatically set exposure and focus, press the Shutter
	button halfway and hold. When the ready light glows
	green, press the Shutter button the rest of the way
	down to take the picture.
	■ Decrease the shutter speed or increase the ISO speed
	(page 14).

45