Kodak LS743 manual Changing the slide show display interval, Running a continuous slide show loop

Reviewing pictures and videos

2Press to highlight Slide Show , then press the OK button.

3Press to highlight Begin Show, then press the OK button.

Each picture and video is displayed once, in the order in which you took them.

To cancel the Slide Show, press the OK button.

Changing the slide show display interval

The default interval setting displays each picture for 5 seconds. You can increase the display interval up to 60 seconds.

1On the Slide Show menu, press to highlight Interval, then press the OK button.

2Select a display interval.

To scroll through the seconds quickly, press and hold .

3Press the OK button.

The interval setting remains until you change it.

Running a continuous slide show loop

When you turn on Loop, the slide show is continuously repeated.

1On the Slide Show menu, press to highlight Loop, then press the OK button.

2Press to highlight On, then press the OK button.

The slide show repeats until you press the OK button or until battery power is exhausted.

Displaying pictures and videos on a television

You can display pictures and videos on a television, computer monitor, or any device equipped with a video input. (Image quality on a television screen may not be as good as on a computer monitor or when printed.)

NOTE: Ensure that the Video Out setting (NTSC or PAL) is correct (see page 20). The slide show stops if you connect or disconnect the cable while the slide show is running.

1Connect the audio/video cable (included) from the camera video-out port to the television video-in port (yellow) and audio-in port (white). See your television user’s guide for details.

2Review pictures and videos on the television.

27