Kodak CX7525 manual Direct printing problems

			Troubleshooting
	Status	Cause	Solution
	Ready light blinks	Flash is not charged.	Wait. Resume picture taking
	orange.		when the light stops blinking
			and turns off.
		Auto exposure or	Release the Shutter button and
		auto-focus are not set.	recompose the picture.
	Ready light glows steady	Camera’s internal	Transfer pictures to the
	red.	memory or card is full.	computer (page 38), delete
			pictures from camera (page 25),
			switch image storage locations
			(page 20), or insert card with
			available memory (page 7).
		Camera processing	Wait. Resume picture taking
		memory is full.	when the light turns off.
		Card is read-only.	Change image storage location
			to internal memory (page 20), or
			use a different card.
Direct printing problems
	Status	Cause	Solution
	Camera or printer display	There is a camera or	Follow the prompts to resolve
	an error message.	printer issue.	the issue. (The camera screen
			may display error messages for
			the printer. See the printer user
			guide, if applicable.)
	Cannot locate desired	The Mode dial is set to	Turn off the camera, then turn
	picture.	Favorites.	the Mode dial to Auto.
		Camera is not accessing	Use the Direct print menu to
		the storage location for	change the image storage
		that picture.	location (internal memory, card,
			or Favorites).
	The Direct print menu	The menu interface has	Press any button to redisplay it.
	interface turns off.	timed out.
	Cannot print pictures.	There is a connection	Ensure the connection between
		issue.	camera and printer (page 39).
		There is a power issue.	Ensure the printer and camera
			have power (page 39).
www.kodak.com/go/support			47