Kodak CX7525 Using the auto-focus framing marks, While the shutter button is pressed halfway

Taking pictures and videos

Using the auto-focus framing marks

When using the camera screen as a viewfinder, framing marks indicate where the camera is focusing. For the best possible pictures, the camera attempts to focus on foreground subjects, even if the subjects are not centered in the scene.

NOTE: This procedure does not apply to videos.

1Press the OK button to turn on the camera screen.

2Press the Shutter button halfway and hold.

When the framing marks turn green, focus is accomplished.

While the shutter button is pressed halfway:

Framing marks

Center focus

Center wide focus

Side focus

Center and side focus

Left and right focus

3Press the Shutter button the rest of the way down to take the picture.

4If the camera is not focusing on the desired subject (or if the framing marks disappear and the Ready light blinks red), release your finger, recompose the scene, and go to Step 2.

NOTE: Framing marks appear only when the camera screen is on. Framing marks do not appear in Landscape mode.

www.kodak.com/go/support 11