Kodak CD1013 manual Camera/computer communications, With the camera

Troubleshooting

If...	Try one or more of the following
Memory card full.	■ Insert a new card (see page 3).
	■ Transfer pictures to the computer (see page 35).
	■ Delete pictures/videos (see page 14).
Memory card and	■ Transfer pictures to the computer (see page 35).
internal memory	■ Delete pictures/videos (see page 14), or insert a new card
full.
	(see page 3).
Camera/computer communications

If...	Try one or more of the following
The computer does	■ Visit www.kodak.com/go/c1013support.
not communicate	■ Turn on the camera (see page 2).
with the camera.	■ Install new batteries (see page 1) or charge rechargeable batteries.
	■ Connect the USB cable to camera and computer port (see page 35).
	■ Install the software (see page 34).
	■ Disconnect the USB cable. Close all software applications. Re-install
	the software (see page 34).
	■ Disconnect camera from the computer. Close all software applications,
	reconnect camera.
Cannot transfer	■ Disconnect the USB cable. (If using camera dock or printer dock,
pictures.	disconnect cable and remove camera from dock). Close all open
(The Add New	applications. Re-install the software (see page 34).
	■ Disconnect the USB cable. Close all software applications. Re-install
Hardware Wizard
cannot locate	the software (see page 34).
drivers.)

www.kodak.com/go/support 41