Chapter 3
A low, double tone could also indicate a low light condition. See page 46 in the Troubleshooting section.
Shooting Silent Movie Clips
You can capture and store up to six,
1 Press the Mode button until the 
icon is displayed in the LCD.
2Set the focus ring to the 
position.
3 Center the subject in the viewfinder.
4Press the Shutter button completely down to begin taking the silent movie clip. Release the Shutter button to end the clip.
Maximum clip length is ten seconds.
The camera sounds a double tone when you start and stop taking the clip. The picture count on the LCD increases by one.
If the camera beeps a low, double tone and does not operate, make sure the
focus ring is set to the 
position (see page 12).
A low, double tone could also indicate a low light condition. See page 46 in the Troubleshooting section.
17