Kodak P850 manual Changing the flash settings

Doing more with your camera

Changing the flash settings

The active icon is displayed in the EVF/LCD screen.

1Press.

(Press again to exit.)

2 to highlight an option.

3Press OK or Set.

Blinking indicates the flash

is charging. Take the picture when the blinking stops.

NOTE: Flash settings are preset for each picture-taking mode. Some of the flash settings may not be available in all Capture or SCN modes. When you change to Auto or Red-eye in some of these modes, it becomes the default until you change it.

NOTE: For rapid setting changes, see page 40.

Flash mode	Flash fires
Auto	When the lighting conditions require it.
Fill	Every time you take a picture, regardless of the lighting conditions. Use
	when the subject is in shadow or is "backlit" (when the light is behind
	the subject). In low light, hold the camera steady or use a tripod.
Redeye	Once, so the subject’s eyes become accustomed to the flash, then fires
	again when the picture is taken. (If the lighting conditions require flash
	but do not require Red-eye reduction, the flash may fire only once.)
Slow	Regardless of the shutter speed and right after the shutter fully opens.
front	Only useful when slower shutter speeds are used. For other slow-flash
sync	settings, see page 52.
Off	Never.

www.kodak.com/go/support 36