Kodak Z812 IS manual Using the Drive button, Using the self-timer

Taking pictures/videos

Using the Drive button

Mode	Icon(s)			Purpose
Self-timer	10	2	2X	See Using the self-timer
Burst				See page 12
Exposure				See page 13
Bracketing
Normal	(none)			Normal picture taking

Using the self-timer

1Place camera on a tripod or flat surface.

2In any Still mode, press the Drive button.

• Once for a 10-sec. delay (so you have time to get into the scene)

•Again for a 2-sec. delay (for a steady, shutter release on a tripod)

•Again for 2 pictures (after a 10- and 18-second delay)

3	Compose the scene.
4	Press the Shutter button halfway, then completely down.
	The picture is taken after the delay.

To cancel the Self-timer before the picture is taken, press the Drive button. (The Self-timer setting remains active.)

Use the same procedure to take a video, but:

■Turn the Mode dial to Video .

■Press the Shutter button completely down.

NOTE: The video stops when no storage space remains. Only the 2- and 10-second options are available in video mode.

www.kodak.com/go/support 11