Kodak Z1485 IS manual Try one or more of the following

			Troubleshooting
Camera ready light status
	If	Try one or more of the following
	Ready light does	■ Turn on the camera (page 2).
	not turn on and the	■ Install new batteries (page 1) or charge rechargeable batteries. (See
	camera does not	the user documentation that accompanies your charger, dock, etc.)
	work.
		■ Turn camera off, then back on.
	Ready light blinks	■ Camera is operating normally.
	green.
	Ready light blinks	■ Wait. Resume picture taking when the light stops blinking and turns
	amber.	green.
	Ready light blinks	■ Install new batteries (page 1) or charge rechargeable batteries. (See
	red and camera	the user documentation that accompanies your charger, dock, etc.)
	turns off.
	Ready light glows	■ Transfer pictures to the computer (page 44), delete pictures from the
	steady red.	camera (page 15), switch image storage locations (page 30), or insert
		a card with available memory (page 3).
		■ Wait. Resume picture taking when the light turns off.
		■ Change the image storage location to internal memory (page 30), or
		use a different card.
	Ready light is off or	■ Camera is operating normally.
	glows steady
	green.
Camera/computer communications
	If		Try one or more of the following
	Cannot transfer pictures.		■ Disconnect USB cable. (If using camera dock or printer
	(The Add New Hardware Wizard		dock, disconnect cable and remove camera from
	cannot locate drivers.)		dock). Close all open applications. Re-install the
			software (page 43).
			■ Disconnect the USB cable. Close all open applications.
			Re-install the software (page 43).

www.kodak.com/go/support 51