Kodak Z8612 IS Blue or black Card or internal memory see, Instead of a, To take another picture

Troubleshooting

If	Try one or more of the following
In Review mode, a	■ Transfer the picture to the computer (see page 43), then format the
blue or black	card or internal memory (see page 34).
screen is displayed	Caution: Formatting a card deletes all pictures and videos,
instead of a	including protected files.
picture.	■ Take another picture. If screen is still blue or black, visit
	www.kodak.com/go/z8612support and select Interactive
	Troubleshooting and Repairs.
Shutter button	■ Turn on the camera (see page 2).
does not work.	■ Wait until the Image Storage icon stops blinking red before attempting
	to take another picture.
	■ Transfer pictures to the computer (see page 43), delete pictures from
	the camera (page 17), switch image storage locations (see page 32),
	or insert a card with available memory (page 3).
	■ If problem persists, visit www.kodak.com/go/z8612support and select
	Interactive Troubleshooting and Repairs.
Slide show does	■ Adjust the camera Video Out setting (NTSC or PAL, see page 34).
not run on external	■ See the external device’s user’s guide.
video device.
Picture is too light.	■ When using the flash, move so there is at least 2 ft (0.6 m) between
	the camera and the subject.
	■ Decrease Exposure Compensation (see page 37).
Picture is not clear.	■ Clean the lens (see page 59).
	■ Make sure your camera is not in Close-up mode.
	■ Move so there is at least 2 ft (0.6 m) between the camera and the
	subject.
	■ Place the camera on a flat, steady surface or use a tripod.

48 www.kodak.com/go/support