Kodak Z8612 IS manual LCD messages, Videos, including protected files

Troubleshooting

Camera/computer communications

If	Try one or more of the following
The computer does	■ Turn on the camera (see page 2).
not communicate	■ Install new batteries (see page 1) or charge rechargeable batteries.
with the camera.	■ Connect cable to camera and computer port (see page 43).
	■ Install the software (see page 42).
	■ Disconnect the USB cable. Close all open applications. Re-install the
	software (see page 42).
	■ Disconnect camera from the computer. Close all software applications,
	reconnect camera.
Cannot transfer	■ Disconnect USB cable. (If using camera dock or printer dock,
pictures.	disconnect cable and remove camera from dock). Close all open
(The Add New	applications. Re-install the software (see page 42).
	■ Disconnect the USB cable. Close all open applications. Re-install the
Hardware Wizard
cannot locate	software (see page 42).
drivers.)	■ Try another USB port, or another computer.
	■ Try transferring pictures using a card reader.
LCD messages

If	Try one or more of the following
No images to display	■ Change image storage location setting (see page 32).
Memory card requires	■ Insert a new card (see page 3) or format the card (see
formatting	page 34).
	■ Caution: Formatting a card deletes all pictures and
Memory card cannot be read
(Please format memory card	videos, including protected files.
or insert another card)
Only one USB connection	■ Unplug the USB cable from the camera.
allowed.
Disconnect cable or rem.
(remove) camera from dock.
50	www.kodak.com/go/support