Kodak Z1012 IS manual Troubleshooting

	Troubleshooting
If	Try one or more of the following
In Review mode, a	■ Transfer the picture to the computer (see page 43), then format the
blue or black	card or internal memory (see page 35).
screen is displayed	Caution: Formatting a card deletes all pictures and videos,
instead of a	including protected files.
picture.
Slide show does	■ Adjust the camera Video Out setting (NTSC or PAL, see page 35).
not run on external	■ See the external device’s user’s guide.
video device.
Picture is too light.	■ Add more distance between the camera and the subject.
	■ Decrease Exposure Compensation (see page 36).
Picture is not clear.	■ Clean the lens (see page 57).
	■ Make sure your camera is not in Close-up mode.
	■ Press the shutter button halfway to focus and set exposure. When the
	framing marks turn green, press the Shutter button completely down.
	■ Place the camera on a flat, steady surface or use a tripod.
Picture is too dark.	■ Turn on the flash (see page 10).
	■ Move within flash range (see page 10).
	■ Use Fill flash (see page 10) or change your position so light is not
	behind the subject.
	■ Increase Exposure Compensation (see page 36).
Camera does not	■ Purchase a certified SD/SDHC card.
recognize	■ Format the card (see page 35).
SD/SDHC card.	Caution: Formatting a card deletes all pictures and videos,
	including protected files.
	■ Insert a card into the slot, then push to seat (see page 4).
Camera freezes up	■ Turn the camera off, then back on. Make sure the camera is turned off
when a card is	before inserting or removing a card.
inserted or
removed.
www.kodak.com/go/support		47