Kodak Z1285 OK to Access Options Settings White Balance, Exposure Metering, AF Zone, +/- 0.7 EV

						Doing more with your camera
Press Menu,				,
		, and OK to	access			Options
	settings
White Balance					Auto (default)—automatically corrects white balance. Ideal
Choose your lighting					for general picture taking.
condition.					Daylight—for pictures in natural lighting.
Available only in P/M and					Tungsten—corrects the orange cast of household light bulbs.
Panorama modes.					Ideal for indoor pictures under tungsten or halogen lighting
					without flash.
					Fluorescent—corrects the green cast of fluorescent lighting.
					Ideal for indoor pictures under fluorescent lighting without
					flash.
					Open Shade—for pictures in shade in natural lighting.
Exposure Metering					Multi-pattern(default)—evaluates lighting conditions
Evaluate light levels at specific					throughout the image to give an optimum picture exposure.
areas of a scene.					Ideal for general picture taking.
Available only in P/M and					Center-weighted—evaluates the lighting conditions of the
Panorama modes.					subject centered in the LCD. Ideal for backlit subjects.
					Spot—similar to Center-weighted, except the metering is
					concentrated on a smaller area of the subject centered in the
					LCD.
AF Zone					Multi-zone(default)—evaluates 5 zones to give an even
Select a large or concentrated					picture focus. Ideal for general picture taking.
area of focus.					Center-zone—evaluates the small area centered in the LCD.
Available only in P/M and					Ideal when precise focus of a specific area in the picture is
Panorama modes.					needed.
Exposure Bracketing					Off (default)
Interval					+/- 0.3 EV
Choose the difference in
					+/- 0.7 EV
exposure compensation while
					+/- 1.0 EV
using exposure bracketing.					See page 37.
Available only in P/M mode.
www.kodak.com/go/support							29