Kodak Z1275, Z1285 manual Camera/computer communications, Amber Green

Troubleshooting

If	Try one or more of the following
Ready light blinks	■ Wait. Resume picture taking when the light stops blinking and turns
amber.	green.
Ready light blinks	■ Install new batteries (see page 1) or charge rechargeable batteries.
red and camera
turns off.
Ready light glows	■ Transfer pictures to the computer (see page 45), delete pictures from
steady red.	the camera (see page 15), switch image storage locations (see
	page 31), or insert a card with available memory (see page 3).
	■ Wait. Resume picture taking when the light turns green.
	■ Change the image storage location to internal memory (see page 31),
	or use a different card.
Ready light is off or	■ Camera is operating normally.
glows steady
green.
Camera/computer communications

If	Try one or more of the following
The computer does	■ Turn on the camera (see page 2).
not communicate	■ Install new batteries (see page 1) or charge rechargeable batteries.
with the camera.	■ Connect cable to camera and computer port (see page 45).
	■ Install the software (see page 44).
	■ Disconnect the USB cable. Close all open applications. Re-install the
	software (see page 44).
	■ Disconnect camera from the computer. Close all software applications,
	reconnect camera.
Cannot transfer	■ Disconnect USB cable. (If using camera dock or printer dock,
pictures.	disconnect cable and remove camera from dock). Close all open
(The Add New	applications. Re-install the software (see page 44).
	■ Disconnect the USB cable. Close all open applications. Re-install the
Hardware Wizard
cannot locate	software (see page 44).
drivers.)
52	www.kodak.com/go/support