Kodak V603 manual Computer/connectivity problems

			Troubleshooting
Computer/connectivity problems
	Status		Solution
	Computer does not		■ Make sure the battery is charged and installed correctly (page 1).
	communicate with		■ Turn on the camera.
	the camera		■ Make sure the USB cable model U-8 is connected to the camera
			and the computer (page 43). (If using an EasyShare dock, check
			all cable connections. Make sure the camera is seated on the
			dock.)
			■ Make sure EasyShare software is installed (page 42).
	Pictures do not		■ See Help in EasyShare software.
	transfer to computer
	Slide Show does not		■ Adjust the camera Video Out setting (NTSC or PAL, page 33).
	run on an external		■ Make sure the external device settings are correct. (See the
	video device		device’s user’s guide).
Picture quality problems
	Status	Solution
	Picture is not clear	■ To automatically set exposure and focus, press the Shutter button
			halfway. When the framing marks turn green, press the Shutter
			button completely down to take the picture.
		■ Clean the lens (page 60).
		■ Make sure the camera is not in Macro mode if you are more than
			27.6 in. (70 cm) from your subject.
		■ Place the camera on a flat, steady surface or use a tripod (especially
			in high-zoom settings or in low light).

www.kodak.com/go/support 49