Kodak V603 manual Direct printing PictBridge enabled printer problems, Effective flash range

Troubleshooting

	Status	Solution
	Picture is too dark	■ Reposition the camera for more available light.
		■ Use Fill flash (page 9) or change your position so light is not behind
		the subject.
		■ Move so that the distance between you and the subject is within the
		effective flash range (page 54).
		■ To automatically set exposure and focus, press the Shutter button
		halfway. When the framing marks turn green, press the Shutter
		button completely down to take the picture.
	Picture is too light	■ Reposition the camera to reduce the amount of available light.
		■ Turn the flash off (page 9).
		■ Move so that the distance between you and the subject is within the
		effective flash range (page 54).
		■ To automatically set exposure and focus, press the Shutter button
		halfway. When the framing marks turn green, press the Shutter
		button completely down to take the picture.
		■ In Auto and SCN-Custom modes, adjust the Exposure Compensation
		(page 34).
Direct printing (PictBridge enabled printer) problems
	Status		Solution
	Cannot find the desired picture.		■ Turn on the camera. Make sure the camera is not in
			Favorites mode.
			■ Use the Direct print menu to change the image
			storage location.
	The Direct print menu interface		■ Press any camera button to redisplay the menu.
	turns off.
	Cannot print pictures.		■ Make sure there is a connection between the camera
			and the printer (page 44).
			■ Make sure the printer and the camera have power.
	Camera or printer display an error		■ Follow the prompts to resolve the issue.
	message.
50			www.kodak.com/go/support