Kodak C613 manual Check the image storage location setting see, Picture or, Instead of a, Subject

	Troubleshooting
If...	Try one or more of the following
In Review mode,	■ Check the image storage location setting (see page 24).
you do not see a
picture (or the
expected picture)
on the LCD screen.
In Review mode, a	■ Transfer the picture to the computer (see page 36), then format the
blue or black	card in the camera (see page 26).
screen is displayed	Caution: Formatting a card deletes all pictures and videos,
instead of a	including protected files.
picture.
Shutter button	■ Turn on the camera (see page 2).
does not work.	■ Transfer pictures to the computer (see page 36), delete pictures from
	the camera (see page 14), switch image storage locations (see
	page 24), or insert a card with available memory (see page 3).
Picture is too light.	■ Move so there is at least 2 ft (0.6 m) between the camera and the
	subject.
	■ Decrease Exposure Compensation (see page 27).
Picture is not clear.	■ Clean the lens (see page 52).
	■ Make sure your camera is not in Close-up mode.
	■ Move so there is at least 2 ft (0.6 m) between the camera and the
	subject.
	■ Place the camera on a flat, steady surface or use a tripod.
Picture is too dark.	■ Turn on the flash (see page 7).
	■ Move so there is no more than 11.8 ft (3.6 m) in wide angle and
	6.9 ft (2.1 m) in telephoto between the camera and the subject.
	■ Use Fill flash (see page 7) or change your position so light is not
	behind the subject.
	■ Increase Exposure Compensation (see page 27).

www.kodak.com/go/support 41