Kodak 125PX manual Image Structure, Curves, Push Processing Roller Transport Processors, Iso Rpl

Push Processing: Roller Transport Processors

To process pushed PLUS-X 125 Film in a machine with DURAFLO RT Developer, use a normal machine process with the machine speed shown in the appropriate table below.

EI		Machine Speed
KODAK VERSAMAT Film Processor, Models 5 and 411
250/25°		4.0 ft (1.2 m)/min (normal)
500/28°		3.0 ft (0.9 m)/min
KODAK VERSAMAT Film Processor, Model 11
250/25°		8.5 ft (2.6 m)/min (normal)
500/28°		6.4 ft (1.9 m)/min
Other Roller-Transport Processors
EI	Development Time at
		80° F (27° C)
250/25°		60 seconds
		(normal)
500/28°		80 seconds

IMAGE STRUCTURE

The data in this section is based on development in KODAK HC-110 Developer (Dilution B), 70° F (21° C), 5 minutes in a large tank, with manual agitation at 1-minute intervals.

Resolving Power		Diffuse rms
ISO RPL	ISO RPL	Granularity*
TOC 1.6:1)	TOC 1000:1)
50	125	10 (extremely fine)

*Read at a net diffuse density of 1.0, using a 48-micrometre aperture, 12X magnification.

CURVES

Characteristic Curves

3.0
	Exposure: Daylight
	KODAK PROFESSIONAL Developer D-76
	Small Tank
	20 C (68 F)
	Diffuse Visual
2.0
DENSITY
1.0
							= 11 minutes
							= 7 minutes
							= 5 minutes
0.0
3.5	3.0	2.5	2.0	1.5	1.0	0.5	0.0	0.5	1.0

LOG EXPOSURE (lux-seconds)

3.0
Exposure: Daylight
KODAK PROFESSIONAL T-MAX Developer
Small Tank
20 C (68 F)
Diffuse Visual
2.0
DENSITY
1.0
							= 11 minutes
							= 7 minutes
							= 6 minutes
0.0
3.5	3.0	2.5	2.0	1.5	1.0	0.5	0.0	0.5	1.0

LOG EXPOSURE (lux-seconds)

KODAK PROFESSIONAL PLUS-X 125 Film / 125PX • F-4018 7