Konica Minolta TC-X manual Loading film

Page 10

5.Loading film

1)Turn the power switch (2) "on." Pull the rewind knob (16) all the way out and the back cover (37) of the camera will open.

2)Place a roll film into the film cassette chamber (31), then push the rewind knob all the way back down.

3)Pull the tip of the film out a few centimeters until it reaches the film take-up spool (39). Then insert the tip into the slit in the take-up spool.

4)Turn the film advance lever (1) and make sure the holes in the edge of the film fit on the teeth of the sprocket (40). Now close the back cover tightly.

5)Raise the film rewind crank (15) and turn it slightly in the direction of the arrow to reduce slack of the film inside the magazine.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Konica TC-X Thank you for your purchase of a Konica TC-XKonica TC-X specifications Eight simple steps for photography Changing the lens Changing the lens Attaching the lens Inserting batteryRemoving the lens Power switch Inserting Battery Power switch Setting film speed Setting film speed Page Loading film Loading film Automatic exposure system AE Focusing Microdiaprism Split image Matted plane Focus at the center of the viewfinderUnder-exposure warning Checking the apertureOver-exposure warning Unloading film Unloading filmOperation in manual mode Stopped-down metering Light Metering at Full Lens Opening Using the self-timer Using the self-timerElectronic flash photography Exposure compensation Bright subject, dark background Using depth of fieldExposure compensation Using depth of field
Top Page Image Contents