Konica Minolta TC-X manual Power switch, Inserting Battery

Page 6

2. Inserting Battery

The Konica TC-X uses a single LR03, R03 dry battery (AAA size) as the power source for the AE system4.butkus.org

1) Open the battery chamber cover (36) by pushing the cover in (he direction of the arrow.

2) Place a fresh battery in the chamber, making sure that the " + " and "" -- "" poles of the battery march those in the battery chamber. Close the battery chamber cover.

3) To make sure the battery is working, look through the view-finder with the power switch "on" aiming towards the sky or a light. The AE needle will swing rapidly if the battery is operating.

*Wipe battery with a dry cloth before loading.

*Battery will last about two years with normal use (manufacturer's estimate). When the AE needle does not move even if the camera is aimed at the sky or bright light with power switch "on", replace battery.

3. Power switch

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Konica TC-X Thank you for your purchase of a Konica TC-XKonica TC-X specifications Eight simple steps for photography Changing the lens Inserting battery Changing the lens Attaching the lensRemoving the lens Power switch Inserting BatterySetting film speed Power switchSetting film speed Page Loading film Loading film Automatic exposure system AE Focusing Microdiaprism Split image Matted plane Focus at the center of the viewfinderChecking the aperture Under-exposure warningOver-exposure warning Unloading film Unloading filmOperation in manual mode Stopped-down metering Light Metering at Full Lens Opening Using the self-timer Using the self-timerElectronic flash photography Exposure compensation Using depth of field Bright subject, dark backgroundExposure compensation Using depth of field
Top Page Image Contents