DATE IMPRINTING
The date and time of recording can be printed directly on the |
|
image. The imprinting function must be activated before the |
|
image is taken. Once activated, the date will continue to be |
|
imprinted until the function is reset; a yellow bar is displayed |
|
behind the frame counter on the monitor to indicate the |
|
imprinting function is active. |
Date imprinting is activated with section 1 of the advanced recording menu (p. 52). Date imprinting has two menu options. The YYYY/MM/DD option prints the date. The MM/DD/hr:min option prints the month, day, and time of recording.
Camera Notes
The date and time are imprinted in the lower right corner of the image when viewed horizontally. It is printed directly on the photograph writing over the image information. The date can be imprinted in three formats: year / month / day, month / day / year, and day / month / year. The date and date format are set in section 3 of the setup menu (p. 86).
Every time a still image is recorded, it is stored with an Exif tag that contains the date and time of recording as well as shooting information. This information can be viewed with the camera in the playback mode, or on a computer with the DiMAGE Viewer software.
56
RECORDING - ADVANCED OPERATION 
