Mamiya C330S: Page 12
Winding & Shutter Test Without Film
12 
the shutter will be released. By turning the film advance crank until it stops the shutter button may be depressed again.
Open the back cover and make sure that a spool has been inserted into the
3.By closing the back cover and turning the film advance crank, the exposure counter will advance. When figure 1 appears on the counter, the crank will be stopped.
Turn the shutter speed ring and align a desired shutter speed with the index line. The shutter speed ring must be set on a click stop position. Turn the aperture ring and set a desired f/stop to the index line. The aperture ring may be set at intermediate click stop positions.
5.Depress the shutter button and
·Depending on the kind of take- up spools (especially in case of metal one) the shutter may not be cocked by a single winding.
·When the shutter speed ring is set on "B" (Bulb), the shutter will remain open as long as the shutter button is depressed and it will close as soon as the shutter button is released. This method is used for a long exposure of 2 seconds or more.
<- Prev Table of Contents Next
file:///E/c330s/page_12.html