Mamiya 645 AFD III manual Loading Film in the Magazine

Page 16

Loading Film in the Magazine

A roll of film can be inserted into the magazine whether the magazine is installed onto the camera body or not.

Caution: When the pressure plate (120/220) is set erroneously

B

A

1.Open the back cover of the magazine.

Hold down the A button and press the B button to the right.

■When the pressure plate setting does not correspond to the loaded film a mis- match between the pressure plate setting and loaded film may result in a focusing error and/or camera malfunction. Always ensure that the pressure plate setting corresponds to the loaded film.

 

Plate

Loaded

Result

 

Setting

Film

 

 

120

220 type

- Inaccurate focusing.

- Film winding after 16 exposures.

 

 

 

 

 

 

- Inaccurate focusing.

 

 

 

- After the 16th exposure has been made, the shutter can be released a

 

 

 

few times until the film's leader paper has run out, but the shutter

220

120 type

blades may be damaged by the leader paper at the film end or by the

 

 

 

film's sticker.

2. Take out the roll-film insert.

Pinch the knobs C of the roll-film insert in the chamber with your fingers and take out the roll-

Insert the dark slide in the magazine and press the shutter button and

the emergency film wind button simultaneously. (See page 40)

C

D

film inset.

■When you load a film in the magazine for the first time, remove the protective paper which is attached to the pressure plate of the roll- film insert.

3. Set the film type (120 or 220).

Hold the button D under the knob and turn the pressure plate. This frees the pressure plate and permits it to be turned and set for either 120 or 220 film.

F

E

4.Attach the empty spool to the roll-film insert.

Flip open the backing plate E of the lower com- partment, fit an empty spool to the bearing, and push the backing plate F back to the original position.

5. Set a film.

Flip open the backing plate G of the upper com- partment, set a new roll of film as shown, and return the backing plate G to the original posi- tion.

★Be sure to align the lock pins with the holes on the pressure plate. The selected film type will be visible through the window on the pressure plate and will be displayed on the LCD of the magazine when the roll-film insert is loaded.

Film path

29

 

30

 

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Instructions Special Advice To Professional Photographers PrefaceNames of Parts and Functions Liquid Crystal Displays LCD Main LCDViewfinder LCD Electronic Dial OperationCustom Functions 90 to ContentMiscellaneous Operations 98 to110 Set the auto focus mode selec- tor lever to S. See Camera Operation TestChecking the Battery Power Alkaline batteryInserting the Batteries without batteries Camera will not operateInstalling the Battery in the Magazine Battery Power / Battery CareRemove the battery compartment screw cap Insert a batteryAttaching and Removing a Lens Attaching the lensBefore installation Shutter Safety RetractionInstallation and removal of the magazine and its dark slide Attaching / Detaching a MagazineReplacing the Diopter Correction Lens Diopter AdjustmentDiopter not matching.Diopter matching How to imprint the same index number Setting the Index NumberDial Setting Date and Time Setting Date and Time / StrapBasic Operation Setting the Film Speed Attaching a Lens and a MagazineAttaching a Lens Attaching a MagazineLoading Film in the Magazine Attach the leader paper of the film to the empty spool Close the back coverInsert the loaded film insert into the magazine Film.Selecting the Shooting Frame Number Display Compatibility between the HM402 and HM401 120/220 magazinesCamera Magazine BodyTaking Photos in the Fully Automatic Mode Set the focus mode selector lever to S single focus modeMode setting and a C continuous advance Mode setting. SeeShutter Release Button / Holding the Camera FocusShutter Release Button Holding the CameraRemoving a Partially Exposed Roll of Film Unloading the exposed filmElectrical Contacts This chapter describes various functions of the cameraSingle focus mode S Focus Area Continuous focus mode CFocus Modes Focus AreaLenses with the Focus Mode Selector Manual Focus ModeManual Focus Mode M Manual focusing using the focus mark When Auto Focus FailsMals in cages, etc Subjects with continuous re Using the Focus Lock Function Set the focus mode selector lever to S or CAdjust the composition AF Assist Infrared LightSingle-Frame Mode Self-Timer ModeContinuous Mode Drive ModesExposure Modes Program AE PProgram Shift PH/PL Normal Program shift areaAperture Priority AE Av Custom settings C-01 onShutter Priority AE Tv Manual Mode M Turn the front dial to set the desired shutterSpeed ±6 EVCF Custom Function Mode CF ModeOne-push shift function Selected aperture value can be locked. SeeHow to select an exposure mode Exposure Metering ModesExposure Metering Modes Exposure warningsDisplay of the exposure compensation of the viewfinder LCD Exposure CompensationWidth of the exposure compensation step can be changed AE Lock Mode Metered-value difference indicatorMargin Auto-Bracketing ModeNormal exposure Under exposure Multiple Exposure Mode AE settings under auto-bracketing modeSingle-Frame Mode S Continuous Mode CTo cancel the Multiple Exposure Mode Press the shutter release buttonCelled Exposure compensation in typical multiple exposuresTaking Photos with the Mirror Up Using auto focus and auto exposure Manual modeHalfway while looking into the view finder Selecting the Number of Frames to be Shot Electronic Shutter Release Contact / Eyepiece ShutterElectronic Shutter Release Contact Eyepiece ShutterSelf Timer Mode Front / Rear Dial Lock Function Depth of Field / Depth of Field PreviewInfrared Photography Flash PhotographyMetz Flash SCA3952 System Functions Rear Curtain Sync ModeFor example External LCD Panel normal display Flash Compensation SettingsViewfinder LCD read-outs Selected shutter speed and aperture level can be locked See Superimposing DataThis camera’s synchro contact is an X contact Custom Functions Setting Custom Functions Custom Functions of Mamiya 645AFDTypes of Custom Functions AFL function lock mode Mode one-push settingBulb exposure time setting Bulb shutter release settingMiscellaneous Operations Changing the Focusing Screen Using the M645 Manual Focus Lenses External Battery SocketAvailable functions with M645 lens Half press the shutter release button to show shutter speedTripod / Memo Clip Using a TripodMemo Clip When Any of These Displays Appear Specifications Field of View 94%* of actual image Viewfinder InformationMaintenance and check of the camera Importance of Proper MaintenanceCommon Sense Camera Care and Practice After-Sale Servicing

645 AFD III specifications

The Mamiya 645 AFD III is a substantial piece of photographic equipment that has long earned its place as a favorite among professional photographers and serious enthusiasts. Building upon the success of its predecessors, this medium format camera offers a blend of advanced technology and ergonomic design, making it a robust tool for capturing stunning images.

One of the primary features of the Mamiya 645 AFD III is its medium format film capability, which utilizes 120 or 220 film. This allows photographers to achieve superior image quality with greater detail and a richer tonal range compared to standard 35mm cameras. The camera's 6x4.5 cm frame size is ideal for producing high-resolution images that are perfect for large prints and commercial works.

The AFD III is equipped with an advanced autofocus system, featuring a 5-point autofocus sensor that works efficiently in a variety of lighting conditions. The AF lock feature enables precise focusing on subjects, ensuring that photographers do not miss crucial moments. The camera also supports manual focus for those who prefer greater control over their shots.

Another significant aspect of the Mamiya 645 AFD III is its compatibility with a wide range of interchangeable lenses. Mamiya's extensive line of lenses includes options for wide-angle, standard, and telephoto photography, catering to diverse creative needs. This versatility is enhanced by the camera's electronic aperture control, which allows for smooth adjustments while taking photos.

Built with a durable, all-weather body, the Mamiya 645 AFD III stands up to the rigors of professional use. Its design focuses on user comfort, with intuitive placement of buttons and controls that facilitate quick adjustments on the fly. The camera's clear viewfinder provides a bright, unobstructed view for accurate composition.

The inclusion of an electronic film advance further simplifies the shooting process. The camera can automatically advance the film to the next frame, minimizing the risk of double exposure. Additionally, the Mamiya 645 AFD III features a built-in metering system, allowing for accurate exposure readings in various lighting environments.

For those transitioning to digital photography, the AFD III can be paired with a digital back, making it a flexible choice for both film and digital mediums. This adaptability ensures that photographers can choose the best format for their creative vision.

In conclusion, the Mamiya 645 AFD III is a medium format camera that combines quality, versatility, and user-friendly technology. Its impressive features, robust build, and support for various photographic needs make it an exceptional choice for anyone serious about photography. Whether shooting landscapes, portraits, or commercial work, the Mamiya 645 AFD III provides the tools needed to capture stunning images with precision.
Top Page Image Contents