Taking Photos in the Full Automatic Mode
1.Set the shutter release mode selector lever to "S"
There are two shutter release modes: "S" (singleframe advance mode) and "C" (continuous advance mode). (See page 47.) When set to "L", the power is turned off.
2.Set the focus mode selector lever to "S" (single focus mode). (This control is located at the lower left front of the camera.)
There are three focus modes: "S" (single focus
mode), "C" (continuous focus mode) and "M"
(manual focus mode).
3.Set the exposure mode selector dial to "P" (program auto exposure).
There are four exposure modes: "P" (program
AE), "Av" (aperture priority AE), "Tv" (shutter
priority AE) and "M" (manual mode).
4.Set the exposure metering mode selector lever to
There are three exposure metering modes: "A" in which the average light of the entire picture is measured with emphasis on the center of the picture, "S" in which the light in a spot at the center of the picture is measured, and
25 | 26 |